RFID Reader IAE
Short features
- Stationary RFID reader
- Status indication LEDs
- Integrated antenna
- Integrated Ethernet interface
- PoE
- Compact design
Product description
The RFID reader HF60 IAE is impressive due to its compact design. Its convenient size, light weight, and dispensing with external components like an antenna and a power supply make it an easy-to-handle, low-cost RFID solution.
Even if installation conditions are restricted, the reader can be integrated in a space-saving manner. Mounting work is facilitated by a number of screw plates in the housing.
The RFID reader HF60 IAE operates in the 13.56 MHz frequency range. It identifies and writes to transponders in the ISO/ICC 15693 and EPC series (ICS10 and ICS11 from Phillips).
The antenna required for operation is integrated into the device so the reader is not dependent on external components. The connection to an existing LAN is established via an Ethernet interface. The latter supplies power to the reader by PoE (Power over Ethernet) *.
Operating status is indicated by three integrated LEDs. These optical outputs can be enabled individually using protocol commands.
* Requirement: PoE-capable LAN
Specifications
| Part number | THG-V1M-0P00-P1-01E5 |
| Antenna | Integrated frame antenna |
| Protocol | ASCII |
| Dimensions | 174.5 x 90.7 x 51.9 mm / 6.87 x 3.57 x 2.04 in. |
| Weight | 380 g / 13.4 oz. |
| Operating temperature | 0 °C to 50 °C / 32 °F to 122 °F |
| Storage temperature | -20 °C to 70 °C / -4 °F to 158 °F |
| Permissible humidity | 25% to 80% at 50 °C / 122 °F |
| Housing material | ABS |
| Protection class | IP40 |
| Transmit power | 200 mW |
| Ethernet Interface | 10/100BaseT |
| Voltage | PoE (Power over Ethernet) |
| Current | 60 mA |
Questions?
+49-(0)9279-991 550 |
|
