LF70 RFID Reader
Short features
- stationary RFID reader
- large reading range
(up to 100 cm / depends on used transponder) - Hot plug-in feature
- Profibus interface
- suitable for industrial usage
Product description
The RFID Reader LF70 Profibus communicates with passive transponders using the frequency LF 134.2 kHz. The device is suited for applications requiring higher reading ranges. Depending on the type of transponder and the surrounding conditions, the RFID Reader LF70 Ethernet enables reading ranges up to 100 cm.
The housing of the device is made from sturdy plastic with a type-IP54 protection (protection against dust and splash water), particularly suitable for applications in rugged surroundings.
The RFID Reader LF70 Profibus is equipped with a serial interface which can be used for example for software updates. Collected data is then processed via an Profibus interface.
The reader can be installed during operation. The system is configured by means of a membrane keyboard which can be operated while the cover is open. This keyboard calibrates the antenna, tests the read/write functions and, if required, switches the RFID device into a test mode.
The RFID LF LongRange system is complemented by a rod antenna, which is available with a cable length of up to 6 meters.
Specifications
| Part number | TLG- PL2-1O00-SP-0000 |
| Protocol | Profibus-DP |
| Interface | RS485 |
| Baudrate | 9.6 kBd - 12 MBd |
| Reading range | approx. 1070 mm / 3.5 ft. (120 mm Transponder Read only) |
| Writing range | approx. 270 mm / 10.6 in. (32 mm Transponder glass tube) |
| Dimensions | 180 x 254 x 90 mm / 7.1 x 10.0 x 3.5 in. |
| Weight | 1600 g / 46.4 oz |
| Operating temperature | -20°C to 50°C / -4°F to 122°F |
| Storage temperature | -25°C to 70°C / -13°F to 158°F |
| Permissible humidity | 25% to 80% at 50°C / 122°F |
| Protection mode | IP54 |
| Housing | Polycarbonate |
| Voltage | 24 V - 30 V DC |
| Current | 110 mA passive |
| Reading / Writing impulse | Type 140 mA |
Questions?
+49-(0)9279-991 550 |
|
