LF70 RFID Reader - stationary RFID reader
- large reading range
(up to 100 cm / depends on used transponder) - Hot plug-in feature
- Profibus interface
- suitable for industrial usage
The RFID Reader LF70 Profibus communicates with passive transponders using the frequency LF 134.2 kHz. The device is suited for applications requiring higher reading ranges. Depending on the type of transponder and the surrounding conditions, the RFID Reader LF70 Ethernet enables reading ranges up to 100 cm.
The housing of the device is made from sturdy plastic with a type-IP54 protection (protection against dust and splash water), particularly suitable for applications in rough surroundings.
The RFID Reader LF70 Profibus is equipped with a serial interface which can be used for example for software updates. Collected data is processed via an Ethernet interface.
The reader can be installed during operation. The system is configured by means of a membrane keyboard which can be operated while the cover is open. This keyboard calibrates the antenna, tests the read/write functions and, if required, switches the RFID device into a test mode.
The RFID LF LongRange system is complemented by a rod antenna, which is available with a cable length of up to 6 meters.
| Part number |
TLG- PL2-1O00-SP-0000 |
| Protocol |
Profibus-DP |
| Operating Temperature |
-20°C to +50°C -4°F to 122°F |
| Storage Temperature |
-30°C to +70°C -22°F to 158°F |
| Permissible humidity |
25% to 80% at 50°C 122°F |
| Case Material |
Polycarbonat |
| Protection mode |
IP 54 |
| Dimensions |
180 x 254 x 90 mm 7.1 in. x 10.0 in. x 3.5 in. |
| Weight |
approx. 1200 g 42.3 oz. |
| Baudrate |
9.6 kBd - 12 MBd |
| Voltage |
24 V DC |
| Current |
140 mA |
|
