LF60 RFID Reader - stationary RFID Reader
- test mode
- available with digital In- and Output
- robust housing
- various protocols
The RFID Reader LF60 Eco communicates with passive transponders using the frequency LF 134.2 kHz. Collected data is processed to the overall system via a serial interface (RS232).
The RFID Reader is particularly suitable for industrial environments requiring low reading ranges and technical requirements.
On the touch of a button a test mode can be started, in which the information on the read/write power can be retrieved. Several LEDs provide information on the current operational mode.
An additional digital in- and output enables the connection of extern sensors.
The high reliability in service and cost-efficiency make the RFID Reader LF60 Eco a top-notch solution for economic Auto-ID-solutions.
| Part number |
LDN-R2M-6O00-FL-00E1 |
| Protocol |
ASC-I1 |
| Dimensions |
100 mm x 105 mm x 40 mm |
| Weight |
420 g |
| Operating temperature |
0°C to 50°C |
| Storage temperature |
-20°C to 70°C |
| Permissible humidity |
25% to 80% at 50°C |
| Protection mode |
IP40 |
| Housing |
ALU |
| Sicherung Typ TR5 |
500 mA |
| Serial Interface RS232 |
4800 Bd - 38400 Bd |
| Voltage |
18 - 30 V DC |
| Current Read/Write |
80 mA |
| Current Standby |
50 mA |
|
