RFID Reader UF80
Short features
- ISO 18000-6C compliant
- Communication via Ethernet interface
- ETSI frequency range
- Power supply via PoE on request
- With integrated or external antenna
- Configuration transponder on request
- Status indication LEDs
Product description
The UF80 RFID reader communicates with passive transponders in the ETSI frequency range. Captured data is sent to the higher-level system via an Ethernet interface.
Operating status is indicated by three integrated LEDs. The reader also has three other outputs that can be enabled by protocol commands.
The reader features an integrated antenna or it can be supplied with an antenna socket for an external UHF antenna with an SMA connector. Power can also be supplied via the Ethernet interface (PoE).
From software version UF80V1.1 the UF80 reader can be supplied with a stationary SCT configuration transponder that is connected to the cover. This can be used to apply network settings.
The device is of read/write design and complies with standard ISO18000-6C/EPC Global Gen2.
Specifications
| Article number | TUG-T1M-0P00-C0-02L6-K01 (integrated antenna) |
| TUG-T1M-2O00-C0-02L6-K01 (external antenna) | |
| Voltage | 24 V DC (20 - 30 V DC) |
| Current consumption | approx. 0.2 A at 24 V |
| Ethernet interface | 10/100 BaseT |
| Air interface | ISO 18000-6C (EPC Global Class Gen2) |
| European frequency range | 865 - 868 MHz |
| Transmit power | 7- 26.5 dBm, parameterizable in 1 dBm increments |
| Read/write range (integrated antenna) | up to 0.8 m |
| Read/write rane (external antenna) | depending on type of antenna (typ. 2 m) |
| Antenna port (external antenna) | SMA socket, 50 ohms impedance |
| Dimensions | 190 x 126 x 54 mm |
| Weight | approx. 400 g |
| Protection class | IP 65 |
| Housing material | Polycarbonate |
| Operating temperature | -20°C to 50°C |
| Storage temperature | -40°C to 85°C |
| Permissible humidity | 25% to 85% at 50°C |
Questions?
+49-(0)9279-991 550 |
|
